Water Damage Restoration – A Brief Preview

Posted by

It is the method of repairing a home or property to its pre loss condition. Harm to the property could possibly be as a result of an overflow, flood or any other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization on the basis of the water contamination levels, decontaminating and drying the structure, monitoring of the method and completion of the process. You will find two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage because of water guide could be the benchmark tool that is used by firms that specialize in restoration of water damage.
water damage restoration Des Moines, IA

Loss Assessment and Categorization

Loss evaluation is the very first and the most important part of water damage restoration. The assessment needs to be correct so that an appropriate response may be taken. In restorating the damage brought on by water, technicians and the insurance companies must come together and understand what is damaged and just how to go about restoring the damage. Identifying the foundation of the damage, documentation of damage, and accurate estimates are mandatory for a suitable water damage restoration. Categorization is on the basis of the contamination quantities of the water source. The categories are listed below

Category 1 – That is water from clean sources like pipes, sinks and toilets without faeces or urine.

Category 2 – That is water that’s some contaminants like water from a dishwasher, washing machine or toilet with urine.

Category 3 – That is water that is highly unsanitary and is effective at causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are some examples.

Decontamination and Drying

After the evaluation is complete, the method of drying and decontaminating begins at the site. Based on the extent of damage, damage caused because of water may be classified into 4 types. Class 1 Damage- When loss is fixed to a tiny area and less water has been absorbed by materials. This results in slow evaporation rate. Class 2 Damage – Once the damage is always to the entire room and carpet area. Class 3 Damage – When the entire area is saturated with water and Class 4 Damage – when there are lots of deep saturation pockets. Decontamination and drying is just a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments have to be used. Decontamination needs to be achieved if contamination has been detected in the area. Decontamination may be achieved for the entire area or in specific pockets where contamination has been detected.

Leave a Reply

Your email address will not be published. Required fields are marked *